Basic Operation
en-us
23
13.7 Interrupting the wash cycle
1.
Press On/Off.
The program is saved and the appliance switches off.
2.
Press On/Off.
3.
Press
to resume the wash cycle.
13.8 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
1.
Open the appliance door.
2.
Press
for approx. 4 seconds.
3.
Close the appliance door.
a
The cycle is cancelled and ends after approx. 1 minute.
13.9 Displaying wash cycle information
You can show information about cycles and options on the
display.
1.
Press .
2.
Press the cycle button or an option.
13.10 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
▶
Do not fully open the door until water noises have
stopped and steam has subsided.
1.
Please note the information on Preventing Material
Damage
.
2.
Press On/Off.
Summary of Contents for DF210701
Page 1: ...en us Use and Care Manual DF210701 Dishwasher Gaggenau...
Page 43: ......
