en-us
Basic settings
24
Basic settings
14 Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting
Selection
Description
Time setting
00:00 - 24:00
Set the current time.
The setting depends on the time format selected.
Time format
12 h
24 h
1
Set the time format.
Time display
In hours
Time
1
Set the time display for the end of the wash cycle.
"Finish in" shows the remaining time the wash cycle still
has to run, e.g. 3h 25min.
"Finish at" shows the time when the wash cycle will end,
e.g. 3:20pm.
Sprache/Language
See selection on the
appliance.
Select the menu language.
Water hardness
0 - 62
0 - 8
1
Set the water hardness.
"Overview of water hardness settings", Page 16
Rinse aid disp.
0 - 6
5
1
Set or switch off the amount of rinse aid to be dispensed.
"Setting the amount of rinse aid", Page 18
Sensor setting
Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying soiling.
Extra Dry
on
off
1
Switch "Extra Dry" on or off for each operation.
The temperature is increased during the final rinse for a
better drying result. This may increase the run time slightly.
Please take care with delicate dishware.
Eco forecast
on
off
1
Switch EcoCheck on or off.
When selecting the wash cycle, the average water and
energy consumption is briefly shown on the display.
Emotion Light™
off
On via main switch
1
On when opening door
Switch the interior lighting of the appliance on or off.
When the appliance door is opened, the interior lighting
switches off automatically after 10 minutes.
Infolight®
on
1
off
Switch "Infolight®" on or off.
While the wash cycle is running, a spot of light is projected
onto the floor below the appliance door. This light will not
be visible if the appliance is installed at eye level with the
cabinet front fitted flush. If the appliance door is not
completely closed, the spot of light will flash. The wash
cycle has ended when the spot of light is no longer visible
on the floor.
Start program
Auto 130-150°F
1
Prog. last selected
Set a default program for when the appliance is switched
on.
Tone volume
Scale with multiple levels.
Set the signal volume at the end of a wash cycle.
Level 0 switches the signal tones off.
Button volume
Scale with multiple levels
Set the button volume during operation.
Level 0 switches the button tones off.
1
Factory setting (may vary according to model)
