Gaggenau CX 482, Instruction Manual

Page: 34 / 56

34
en
Dynamic cooking for an item of cookware
‰
Dynamic cooking for an item of
cookware
Dynamic cooking for an item of cookware
In this function, the default power levels are displayed
when cookware is placed on the cooking surface.
This allows you to change the power level during
cooking simply by moving the cookware forwards or
backwards.
Default heat settings:
ò
.
ó
,
ð
.
ó
,
î
.
ó
,
ì
.
ó
and
ê
.
ó
.
To change the default heat settings, see the section
entitled
~
"Basic settings"
.
Notes
– If this function is not available in the settings area,
the cookware may be too big. Use a smaller item of
cookware.
– If this does not activate when you select the heat
setting, the appliance may have reached its
maximum power consumption. See
Power
management
setting in the section entitled
~
"Basic settings"
.
– For more information on the size and positioning of
the cookware, see the section entitled
~
"Induction cooking"
.
Activation
Place the cookware on the cooking surface.
1 Touch the cooking position display for the
cookware.
2 Touch the
i
symbol.
3 Use your finger to scroll down to the
Ð
symbol.
Then touch the
G
symbol to confirm your choice.
The function has now been activated.
4 Move the cookware over the cooking surface until
the power level you require is set. The power level
you have selected will appear on the cooking
position display.
Changing the heat setting
You can change the power levels while you are cooking.
To choose a different power level in the programming
area, touch the area you want to change the power level
of.
Note: If the function is deactivated, the power levels will
return to the default values
Deactivating
1 Touch the power level.
2 Touch the
i
symbol and select a different cookware
mode in the settings area.
3 Touch the
G
symbol to confirm your choice.
This function has now been deactivated. The power level
you selected previously will be retained.