Gaggenau CX 482, Instruction Manual

Page: 17 / 56

17
Professional cooking
en
ˆ
Professional cooking
Professional cooking
Use this special function in particular for cooking
processes that require the power levels to be changed
frequently. This allows you to change the power level
quickly and easily during cooking simply by moving the
cookware to the left or right.
Activating this function turns the entire cooking surface
into a single cooking area with three different power
levels. The appliance selects which of the default power
levels to use depending on the position of the
cookware. The power level that is assigned to each item
of cookware appears in the relevant cooking position
display.
Default power levels:
Left-hand section = power level
ò
.
î
Middle section = power level
ê
.
ó
Right-hand section = power level
î
.
ó
You can change the default power levels. To change the
power levels, see the section entitled
~
"Basic
settings"
Notes
– For more information on the size and positioning of
the cookware, see the section entitled
~
"Induction cooking"
.
– While this function is active, cookware mode and
the booster function for saucepans and frying pans
will not be available and you will not be able to set
the cooking time.
Activation
1 Touch the
g
symbol.
2 Touch the
¬
symbol followed by the
G
symbol to
confirm your choice.
The default power levels is displayed on the main
screen.
This function has now been activated.
Set down the cookware
If active cookware is on the cooking position before you
activate the function, the cooking position display
appears without a power level. To confirm the power
level that is assigned, tap on the cooking position
display and then touch the sensor field
G
.
If new cookware is placed on the cooking position, tap
the cooking position display and then touch the sensor
field
G
.
Note: If the size of the cookware is not suitable for this
function, the
Õ
symbol will light up on the cooking
position.
Touch the
Õ
symbol for information.
To return to the main screen, touch the
G
symbol.
Combining sections
The sections with the default power levels can be
combined to form one large surface with the same
power level.
To do this, touch one of the vertical edges of the middle
section and swipe left or right with your finger to the
end of the adjacent section.
The power level of the combined area is the same as the
power level of the section being expanded.
To separate the combined area again, touch one of the
vertical edges of the area and swipe left or right with
your finger until the hidden section reappears.
Changing the heat setting
You can change the power levels while you are cooking.
To choose a different power level in the programming
area, touch the area you want to change the power level
of.
Note: If the function is deactivated, the power levels will
return to the default values