en-us
Hood Control
32
This module is integrated at the factory, under direct con-
trol of BSH Home Appliances Corporation, and is not user
serviceable or upgradable. At least 7⅞ inch (20 cm) sepa-
ration distance should be maintained from device to user.
FCC COMPLIANCE STATEMENT
CAUTION
Changes or modifications not expressly approved could
void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
¡
This device may not cause harmful interference, and
¡
This device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada license exempt
RSS standard(s).
Operation is subject to the following two conditions:
¡
This device may not cause interference, and
¡
This device must accept any interference, including in-
terference that may cause undesired operation of the
device.
Hood Control
8 Hood Control
Hood Control
You can connect your appliance to a hood and, in this
way, control the functions of your appliance via the cook-
top.
If both appliances are Home Connect™ compatible, the
easiest way to connect the appliances is in the Home Con-
nect™ app. To do this, connect the two appliances to
Home Connect™ and follow the instructions in the app.
Alternatively, you have the following options for connecting
the appliances together:
¡
Connecting the appliances directly.
¡
Connecting the appliances via your home network.
Notes
¡
Make sure you follow the safety instructions in the As-
sembly Instructions for your hood and that these are
complied with even when operating the appliance via
the hood controls on the cooktop.
¡
If the appliance is being operated by means of the con-
trols on the hood, this mode of operation always has pri-
ority. It is not possible to use the hood controls on the
cooktop during this time.
¡
In networked standby mode, your appliance requires a
maximum of 2 W.
8.1 Connecting appliances directly
Connect the appliance directly to your hood to control the
hood via the cooktop. If you connect your cooktop directly
to the hood, it cannot be connected to your home network
as well and you will not be able to use Home Connect™.
Note: Note the information for connecting the cooktop in
the Assembly Instructions for your hood.
Requirement: The hood is switched off.
1.
Turn on the cooktop.
2.
Touch to enter the basic settings menu.
3.
Scroll to select Hood control.
4.
Touch
to confirm.
5.
Within 2 minutes, initiate the connection process on the
hood. Refer to the operating instructions of your hood.
a
When the connecting process is complete, a message
indicates, if the connection has been successful.
a
If connection has been successful, lights up on the
display.
6.
Exit the basic settings.
Note: You can change the settings anytime in the basic
settings menu.
8.2 Connecting appliances via your home
network (Wi-Fi)
If the appliances are connected to each other via your
home network, you can operate the hood via the cooktop
controls or with Home Connect™.
Note: The appliances can only be connected when both
are connected to the home network and are simultane-
ously engaged in connecting. If the time allowed for con-
necting has already expired for one of the two appliances,
start the connection process again.
Requirements
¡
Your router has a WPS button. You will find information
about this in the manual for your router.
¡
The hood is connected to the same home network (Wi-
Fi).
1.
Turn on the cooktop.
2.
Touch to enter the basic settings menu.
3.
Scroll to select Hood control.
4.
Select Home Connect.
5.
Touch
to confirm.
6.
Press the WPS button on the router within the next
2 minutes.
a
When the connecting process is complete, a message
indicates, if the connection has been successful.
8.3 Resetting the connection
If you have problems connecting your appliance to your
home network (Wi-Fi) or if you want to log your appliance
onto a different home network (Wi-Fi) , you can reset the
Home Connect™ settings.
Note: If you reset the Home Connect™ settings, the con-
nection to any hood will also be terminated.
1.
Turn on the cooktop.
2.
Touch to enter the basic settings menu.
3.
Scroll to select Hood control.
4.
Select Disconnect from network.
5.
Touch
to confirm.
8.4 Controlling the hood via the cooktop
In the basic settings menu, you can configure what the
hood should do when the cooktop or individual cooking
zones are switched on or off.
You can select other settings using the control panel.
Setting the fan
1.
Touch in the function bar.
2.
Select Hood control.
Summary of Contents for CX 482 611
Page 1: ...en us User manual CX 482 611 Full surface induction cooktop Gaggenau ...
Page 42: ......
Page 43: ......
