Gaggenau CV 281 Instruction Manual Download Page 24

Page: 24 / 36

Basic settings

To access the basic settings:

The hob must be off.

Switch on the hob.

Within the next 10 seconds, touch and hold the

symbol for approx. 4 seconds.

The first four codes displayed provide product
information. Touch the settings area to view the
individual codes.

Touching the

symbol again takes you to the

basic settings.

™

and

‚

will flash alternately on the displays and

‹

will appear as a default setting.

Touch the

symbol repeatedly until the required

function is displayed.

Then select the required setting from the settings
area.

Touch and hold the

symbol for at least

seconds.

The settings have been saved.

Leaving the basic settings

Turn off the hob with the main switch.

™‚ˆ

Configuring air recirculation mode or air extraction mode

‹

Air recirculation mode has been set.*

‚

Air extraction mode has been set.

™‚‰

Configuring automatic start

‹

Switched off.

‚

Switched on: The ventilation system starts at a specified power level.*

™ƒ‹

Configuring the run-on

‹

Switched off.

‚

Switched on: The ventilation system runs in air extraction mode for approx. 6 minutes at power level

„

and in air

recirculation mode for approx. 30 minutes at power level

‚

, and automatically switches off once this time has elapsed.*

™‹

Restoring the factory settings

‹

Custom settings.*

‚

Restore the factory settings.

Indica-
tor/sym-
bol

Function

Factory settings

** The hob's maximum power is shown on the rating plate.

Product information

Code

Directory for the technical after-sales ser-
vice (TK)

‹‚

Production number

”š

Production number 1

Š†

Production number 2

‹

†

PLQ

Summary of Contents for CV 281





































Search results

Summary of Contents for CV 281

Reviews:

Related manuals for CV 281

Brands by name

Popular brands

Gaggenau CV 281, Instruction Manual

Search results

Summary of Contents for CV 281

Reviews:

Related manuals for CV 281

Brands by name

Popular brands