44
en
Home Connect
6
Use the SSID "Home Connect" and the key "Home
Connect" to log your mobile device into the hob
network.It can take up to 60 seconds to connect.
7
Once it is connected successfully, open the Home
Connect app.
The app will now take a few seconds to search for
your hob. Once the hob has been found, you will be
prompted to enter the name (SSID) and password
(key) for your home network (Wi-Fi) into the
corresponding fields if you have not already done
so.
8
Then press "Transfer to household appliance".
9
The
D
symbol will light up on the control panel
when the hob is connected to your home network.
The appliance will automatically try to connect to
the app.
•’ƒ
and
˜‘‚
will flash alternately in the
settings area.The value
‹¯
will flash on the
hotplate display.
When the value
‹¯
stops flashing on the hotplate
display and the value
‹””
lights up again, the login
process is complete.
You can then reconnect your mobile device to your
home network.
Follow the instructions in the app.
Home Connect settings
You can adjust Home Connect to suit your requirements
at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
W
'
Indicator/
symbol
Function
•’‚
/
¯“£
Home network login (Wi-Fi)
‹””
Not connected /disconnect network
’‹‚
Connect automatically
’‹ƒ
Connect manually
‹¯
Connected
•’ƒ
/
˜‘‚
Connection to app
‹””
Not connected/
login process complete
‹¯
Connect
•’„
/
’‹¯
Connection to home network (Wi-Fi)
‹””
Wireless module switched off
‹¯
Wireless module switched on
•’…
/
¥“†
Settings via app
‹””
Switched off
‹¯
Switched on*
•’†
/
—˜š
Software update
š“”
Update available and ready for installa-
tion
‚¯†
Start installation
•’‡
/
¥“š
Remote access by after-sales service
‹””
Not authorised
‹¯
Authorised
•’ˆ
/
†£¥
Wi-Fi signal strength
¯‘
Not connected to home network (Wi-
Fi)
‚
Signal strength 1 (weak)
ƒ
Signal strength 2 (moderate)
„
Signal strength 3 (good)
•’‰
/
†“¥
Connection to Home Connect server
¯‘
Not connected
‹¯
Connected
* Basic setting
