40
en
Childproof lock
A
Childproof lock
Childproof lock
Activating and deactivating the
childproof lock
The hob must be switched off.
To activate: Remove the twist knob from the hotplate.A
signal sounds. The
H
indicator lights up for 10
seconds. The hob is locked.
To deactivate: Place the twist knob on the twistpad.
Note:
Removing the twist knob when the hotplate is
switched on initially activates the display cleaning
protection function. If the twist knob is not put back on
after 10 minutes, the hotplate switches itself off and the
child lock is activated.
k
Display cleaning protection
Display cleaning protection
If you wipe over the control panel while the hob is
switched on, settings may be changed. To avoid this, the
hob has a function you can use to lock the control panel
for cleaning.
To activate:
Remove the twist knob.
An audible signal sounds. The
−
indicator and the hob
settings flash. The heating process is interrupted. If a
cooking timer is set, it will be paused. The control panel
is locked for 10 minutes.
You can now wipe over the surface of the control panel
without altering the settings.
To deactivate:
Put the twist knob back on within
10 minutes.
The control panel is unlocked. The hob continues
operating with the previous settings.
To end the function early, put the twist knob back on
before the 10 minutes have elapsed.
b
Automatic safety cut-out
Automatic safety cut-out
If a hotplate operates for an extended period and no
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating. A signal sounds and the
residual heat indicator
œ
or
•
appears in the hotplate
display.
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours). .
