Home Connect™
en-us
33
Notes
¡
Also note the safety information in this instruction man-
ual and ensure that it is also observed when operating
the appliance using the Home Connect™ app.
¡
Cooktops are not designed to be left unattended. Al-
ways monitor the cooking process.
¡
Operating the appliance on the appliance itself always
takes priority. It is not possible to operate the appliance
using the Home Connect™ app during this time.
¡
In networked standby mode, the appliance requires a
maximum of 2 W.
8.1 Setting up Home Connect™
Requirements
¡
The appliance is connected to the power supply and is
switched on.
¡
You have a mobile device with a current version of the
iOS or Android operating system, e.g. a smartphone.
¡
The mobile device and the appliance are within range of
your home network's Wi-Fi signal.
1.
Download the Home Connect™ app.
2.
Open the Home Connect™ app and scan the following
QR code.
3.
Follow the instructions in the Home Connect™ app.
8.2 Overview of the Home Connect™ settings
You can adjust the settings and network settings for Home Connect™ in the basic settings for your appliance.
Setting
Selection or display
Description and additional information
/
– Not connected/disconnect network
– Connect automatically
– Connect manually
– Connected
Log the appliance on in the WLAN home network (Wi-Fi) or
disconnect from the network.
/
– Not connected
– Connect
Connection to the app
The setting is only displayed if the appliance is connected
to the home network.
/
– Wireless module switched off
– Wireless module switched on
Connection to the Wi-Fi
If Wi-Fi has been activated, you can use the Home Con-
nect™ function.
In networked standby mode, your appliance requires a
maximum of 2 W.
The setting is only displayed if the appliance has been pre-
viously connected to a network.
/
– Switched off
– Switched on
Set using the app
If the setting is switched off, only the cooktop's operating
statuses are displayed in the Home Connect™ app.
/
– Update available and ready to in-
stall
– Start installation
Software update
The setting is only displayed if a software update is avail-
able.
/
– Not authorized
– Authorized
Control remote access by customer service
The setting is only displayed if after-sales service is at-
tempting to connect to the appliance. You can end this at
any time after granting access.
/
– Not connected to the WLAN home
network (Wi-Fi)
– Signal strength 1 (poor)
– Signal strength 2 (moderate)
– Signal strength 3 (good)
Display Wi-Fi signal strength
The setting is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
/
– Not connected
– Connected
Connection to Home Connect™ server
The setting is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
Summary of Contents for CI 282 602
Page 1: ...en us User manual CI 282 602 Cooktop Gaggenau...
Page 3: ...3 15 5 Warranty exclusions 44 15 6 Obtaining warranty service 45...
Page 46: ......
Page 47: ......