Gaggenau CI 282 602, User Manual

Page: 15 / 48

Operation
en-us
15
3.
Press ⁠.
a
lights up in the cooking zone area.
4.
Set the power level.
a
The power level is displayed on both cooking zone dis-
plays.
Note: If both cooking zones are set to different power lev-
els before being linked, both cooking zones switch to 0.
Changing the power level for the flexible cooking
zone
1.
Select one of the two cooking zones of the flexible
cooking zone and adjust the power level with the twist
knob.
2.
Change the power level using the twist knob.
Deactivating the Flex function
1.
Select one of the two cooking zones that belong to the
flexible cooking zone.
2.
Press ⁠.
a
lights up in the cooking zone area.
a
The flexible cooking zone is split into two separate
cooking zones.
Note: If the cooking zone is switched off, and then
switched back on again later, the flexible cooking zone is
reset to function as two independent cooking zones.
7.5 Transfer function
You can use this function to transfer the settings from one
cooking zone to another.
To transfer the settings, move the cookware from the
cooking zone you are using to another cooking zone.
You can also use this function on the flexible cooking
zone. For additional information on how to position the
cookware, refer to the information on using the flexible
cooking zone.
→
"Flex function", Page 14
General information for using this function:
¡
Ensure that the new cooking zone is turned off, does
not have any settings and there is no cookware on it.
¡
If you move several pieces of cookware, only the set-
tings for the cookware you moved last are transferred.
¡
If you set down an additional item of cookware on a dif-
ferent cooking zone before you have confirmed the set-
tings, the transferred settings are available for either
item of cookware. Confirm the required cooking zone.
¡
You can only transfer the booster functions from left to
right or vice versa if no other cooking zone is active.
¡
When you set down the cookware in its original position,
the settings are kept.
¡
If the flexible cooking zone is activated when moving an
item of cookware across the flexible cooking zone, the
settings are applied automatically.
Using the transfer function
Requirement: The new cooking zone is turned off.
1.
Lift the cookware off the active cooking zone.
a
The power level of the original cooking zone is blinking.
2.
Set down the cookware on the new cooking zone.
a
The cookware is detected on the new cooking zone.
lights up.
a
The transferred power level is blinking on the new cook-
ing zone display. lights up on the original cooking
zone display.
3.
Select the new cooking zone to confirm the settings.
a
The power level of the original cooking zone is set to ⁠.
⁠.
7.6 Short-term timer
You can use the Short-term timer to set a time of up to
99 minutes.
The Short-term timer is independent from other settings
and does not switch off a cooking zone.
Setting the Short-term timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
▶
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.