en
Timer functions
14
Starting steam injection
▶
Press .
a
After a short time, the appliance injects steam into
the cooking compartment.
a
Steam is injected for approx. 5 minutes.
Cancelling steam injection
▶
Press
.
7.6 Steam removal
During the steam removal process, the appliance intro-
duces cold water into the cooking compartment. The
steam condenses on the cooking compartment wall
and the cooking compartment cools down.
If you open the appliance door after steam removal,
only a little steam escapes.
WARNING ‒ Risk of scalding!
Hot water may drip down from the appliance door.
▶
Wait until the water on the appliance door has
cooled down.
Steam removal only works with the following types of
heating and if the temperature in the cooking
compartment is below 130 °C:
¡
Hot air + 100% humidity
¡
Hot air + 80% humidity
¡
Hot air + 60% humidity
¡
Full surface grill setting 1 + humidity
¡
Full surface grill setting 2 + humidity
¡
Sous-vide cooking
The steam removal function is also available for a short
time after switching off the appliance.
The appliance carries out steam removal automatically
at the end of an automatic programme →
or
a timer programme (cooking time →
).
Starting steam removal
▶
Press .
Steam removal takes approximately 25 seconds.
During steam removal, the heater is switched off.
Stopping steam removal early
▶
Open the appliance door or press
.
7.7 After each use
After using the steam type of heating, dry the cooking
compartment to ensure that no moisture remains in the
appliance and to prevent odour from building up.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
▶
Open the appliance door carefully.
▶
Keep children at a safe distance.
Drying the cooking compartment
Note:
In order to dry the cooking compartment, the
cooling fan and the fan wheel on the back wall of the
cooking compartment continue to run for a while after
the appliance is switched off. They then switch off auto-
matically. The process of drying the cooking compart-
ment may take up to 95 minutes.
1.
Keep the appliance door closed while the cooking
compartment is being dried.
2.
Remove food residues and/or dirt from the cooking
compartment as soon as the appliance has cooled
down.
Burnt-on food residue and/or dirt will be much
harder to remove later.
3.
If required, you can use the drying programme to
dry the cooking compartment quickly. Drying pro-
gramme →
4.
Once the cooking compartment has cooled down,
polish it with a soft cloth.
5.
If necessary, wipe dry any condensation on units or
handles.
7.8 Switching on the appliance after a safety
switch-off
Requirement:
After prolonged operation, the safety
switches off the appli-
ance.
1.
Turn the function selector to .
2.
Switch the appliance back on again.
8 Timer functions
Your appliance has different timer functions, with which
you can control its operation.
8.1 Overview of the timer functions
Use to select the different timer functions.
Timer function
Use
Short-term timer
Cooking time
1
Cooking time end
1
Stopwatch
1
Not available in standby mode
8.2 Calling up the timer menu
Note:
You can call up the timer menu from any operat-
ing mode. The timer menu is not available if you turn
the function selector to in the basic settings.
▶
Press .
a
The display shows the timer menu.
8.3 Exiting the timer menu
▶
Press .
a
The timer menu is closed.
a
Any settings that are not saved are lost.
Note:
You can exit the timer menu at any time.
