Gaggenau BSP2201.1, User Manual And Installation Instructions

Page: 12 / 48

en
Timer functions
12
7.4 Switching on the appliance
1.
Use the function selector to set the required type of
heating.
a
The display shows the selected type of heating and
the suggested temperature.
2.
If required, use the rotary selector to set the desired
temperature.
a
The display shows the heating symbol ​⁠.
a The bar displays the current heating status.
a
Once the appliance reaches the set temperature, a
signal tone sounds and the heating symbol goes
out
​⁠.
3.
Refill the water tank if necessary.
→
"Fill the water tank", Page 11
During operation, the water tank is locked in the ap-
pliance. Only if the appliance shows that the water
tank is empty can you remove the water tank.
7.5 Switching off the appliance
▶
Turn the function selector to ​⁠.
Depending on the type of heating, you may hear an
automatic rinse cycle running.
7.6 After each use
After using the steam type of heating, dry the cooking
compartment to ensure that no moisture remains in the
appliance and to prevent odour from building up.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
▶
When opening the door, do not stand too close to
the appliance.
▶
Open the appliance door carefully.
▶
Keep children at a safe distance.
Emptying the water tank
ATTENTION!
Heat damages the water tank.
▶
Do not dry the water tank in the hot cooking com-
partment.
1. Open the appliance door carefully.
Hot steam escapes.
2. Remove and empty the water tank.
Drying the cooking compartment
1.
Remove food residues and/or dirt from the cooking
compartment as soon as the appliance has cooled
down.
Burnt-on food residue and/or dirt will be much
harder to remove later.
2.
Use a sponge to wipe away any residual water from
the cooking compartment once it has cooled down.
3.
Wipe out and polish the cooking compartment with
a soft cloth.
4.
If necessary, wipe dry any condensation on units or
handles.
7.7 Switching on the appliance after a safety
switch-off
Requirement:
After prolonged operation, the safety
switch-off function → Page 9 switches off the appliance.
1.
Turn the function selector to ​⁠.
2.
Switch the appliance back on again.
8 Timer functions
Your appliance has different timer functions, with which
you can control its operation.
8.1 Overview of the timer functions
Use ​⁠ to select the different timer functions.
Timer function Use
Short-term timer
Cooking time
1
Cooking time end
1
Stopwatch
1 Not available in standby mode
8.2 Calling up the timer menu
Note:
You can call up the timer menu from any operat-
ing mode. The timer menu is not available if you turn
the function selector to ​⁠ in the basic settings.
▶
Press ​⁠.
a The display shows the timer menu.
8.3 Exiting the timer menu
▶
Press ​⁠.
a
The timer menu is closed.
a Any settings that are not saved are lost.
Note:
You can exit the timer menu at any time.
8.4 Short-term timer
The short-term timer runs independently of the other
appliance settings. You can enter a maximum of
90 minutes.
Setting the short-term timer
1. Press ​⁠.
a
The display shows the "Short-term timer" ​⁠ function.
2. Use the rotary selector to set the required cooking
time.
3. Press ​⁠ to start.
a
The appliance closes the timer menu.
a The time counts down.
a
The display shows ​⁠ and the time that has elapsed.
a
A signal tone sounds once the time has elapsed.
4.
Press ​⁠.
a
The signal tone stops.