en
Basic settings
24
14.6 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡
Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡
Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡
The current software and hardware version of your
appliance.
¡
Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note:
Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Description
Brightness
Levels 1, 2, 3, 4, 5
1
, 6, 7, 8 Set the display brightness
Standby screen
On
1
Off
¡
Clock
¡
Clock + GAGGENAU
logo
1
¡
Date
¡
Date + GAGGENAU
logo
¡
Clock + date
¡
Clock + date + GAG-
GENAUlogo
Appearance of the standby
screen
Off: No display. You can
use this setting to reduce
the standby energy con-
sumption of your appliance.
On: Multiple screens can
be adjusted. Press to
confirm "On" and use the
rotary selector to select the
required screen.
Display screen
Reduced
1
Standard
"Reduced": After a short
time, the display shows
only the most important in-
formation.
Touch field colour
Grey
1
White
Select the colour of the
symbols on the touch fields
Touch field tone type
Tone 1
1
Tone 2
Off
Press a touch field to select
a signal tone
Touch field tone volume
Levels 1, 2, 3, 4, 5
1
, 6, 7, 8 Set the volume of the touch
field tone
Heating up signal
On
1
Off
The signal tone sounds
when the appliance
reaches the required tem-
perature when heating up.
Signal volume
Levels 1, 2, 3, 4, 5
1
, 6, 7, 8 Set the volume of the sig-
nal tone
Time format
AM/PM
24h
1
Set the 24-hour format set
or 12-hour format
Time
Current time
Set the time
1
Factory setting (may vary according to model)