Gaggenau BS 470 612, Use And Care Manual

Page: 37 / 68

37
Basic settings
en-us
Q
Basic settings
Basic settings
In the general settings, you can adapt your appliance
individually.
1.
Set the program selector to S .
2.
Select "General setting" with the rotary selector.
3.
Touch the
™
symbol.
4.
Set the required general setting with the rotary
selector.
5.
Touch the
%
symbol.
6.
Set the general setting with the rotary selector.
7.
Save with
™
or cancel with
'
and quit the current
general setting.
8.
Turn the program selector to 0 to quit the general
setting menu.
Changes are saved.
Basic setting Possible settings Explanation
Brightness Stages 1, 2, 3, 4, 5*, 6, 7, 8 Setting display brightness
Standby screen On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Appearance of the standby screen.
Off: no display. Use this setting to reduce the
standby consumption of your appliance.
On: several displays can be set, confirm "On"
with
™
and choose the desired display with
the rotary selector.
The selection is displayed.
Display screen Minimized*/Standard When ‘Minimized’ is set, only the most import-
ant details are displayed after a short time.
Touchpad color Gray*/White Select the color of symbols on the touchpads
Touchpad tone Tone 1*/Tone 2/Off Select the signal tone when touching a touch-
pad
Touchpad volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touchpad tone
Preheating signal On*/Off The signal tone sounds when the required tem-
perature is reached during preheating.
Signal volume Levels 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the signal tone
Water filter Available* / not available Available: use appliance with water filter.
Not available: use appliance without water fil-
ter.
Water filter capacity 100 - 9000 liters Set the water filter capacity
Water hardness 1-18 Check mains water with the included carbon
hardness test. Set the measured water hard-
ness.
Time format AM/PM / 24 h* Time display in 24 or 12-hour format