Gaggenau BS 470 612, Use And Care Manual

Page: 27 / 68

27
Automatic programs
en-us
▯
Dessert
▯
Bread and pastries
▯
Raising dough
▯
Regenerating
▯
Defrosting
Applying settings for dishes
You are guided through the entire setting process. Follow
the instructions in the display.
Use the rotary selector to scroll through the individual
levels.
1.
Set the function selector to
ž
.
2.
Touch the
i
symbol. Press
™
to confirm.
3.
Use the rotary selector to select the category and
press
™
to confirm.
4.
Use the rotary selector to select the required dish and
press
™
to confirm.
The possible settings appear in the display. For many
dishes, you can change the settings to suit your
needs.
For some dishes, you must set the weight.
Tip: By pressing the
*
symbol, you can receive
information about accessories and preparation
methods.
5.
Press
™
to confirm the required settings. Follow the
directions in the display.
Once the cooking time has elapsed, the appliance stops
heating up and steam removal takes place. An audible
signal sounds.
Opening the appliance door affects the cooking result.
Open the appliance door only briefly. The automatic
program is interrupted and continues to run after closing
the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears in the display asking if you want to
continue cooking.
1.
Press
™
to confirm.
2.
Select a single or double cooking time, depending on
requirements.
3.
Press
I
to start.
4.
If the "Continue cooking" function has ended, turn the
function selector to
0 .
Note: If you touch the
¡
symbol during continued
cooking, the steam removal and the continue cooking
function is ended.
Changing and canceling
After starting the appliance, the settings can no longer
be changed.
If you want to cancel the operation, turn the function
selector to
0 .
Calling up the last automatic programs
used
The last five dishes with the selected settings are saved.
You have the option of saving these dishes with the
selected settings as individual recipes. You can no longer
change the settings of an individual recipe if you have
saved it using the "Last automatic programs" function
1.
Set the function selector to
ž
.
i
is displayed.
2.
Touch the
i
symbol.
3.
Use the rotary selector to select "Last automatic
programs" and press
™
to confirm.
4.
Use the rotary selector to select the required dish and
press
™
to confirm.
5.
Enter a name for the dish and save.
~
"Entering a
name" on page 29