Gaggenau BS 470 612, Use And Care Manual

Page: 21 / 68

21
Timer functions
en-us
After every use
1.
Remove food residues from the oven cavity as soon as
the appliance has cooled down. Burnt-on soil will be
much harder to remove later.
2.
In order to dry the oven cavity, the cooling fan and the
fan wheel on the back wall of the oven cavity continue
to run for a while after the appliance is switched off.
They then switch off automatically. This may take up to
95 minutes. The appliance door must remain closed
while the oven cavity is being dried.
3.
If required, you can dry the oven cavity quickly using
the drying program.
~
"Drying program"
on page 43
4.
Once the oven cavity has cooled down, polish it with a
soft cloth.
5.
Wipe furnishings or handles dry if condensate has
collected on them.
Safety shut-off
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after 12
hours if the appliance is not operated during this time. A
message appears in the display.
Exception:
programming with the long-term timer.
Turn the program selection to 0 , after which you can
operate the appliance in the manner to which you are
accustomed.
O
Timer functions
Timer functions
In the timer menu, set:
Š
Timer
p
Stopwatch
6
Cooking time (not in the idle state)
5
Cooking time end (not in the idle state)
Launching the timer menu
You can launch the timer menu from any mode. Only from
the factory settings, program selection is set to
S , the
time menu is not available.
Touch the
M
symbol.
The timer menu appears.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1.
Call up the Timer menu.
The "Timer" function
Š
is displayed.
2.
Turn the rotary selector to set the desired time.
7LPHU