15
Operating the appliance
en
1
Operating the appliance
Operating the appliance
Cooking compartment
Depending on the oven version, the cooking
compartment has four or five shelf levels. The shelf
levels are counted from the bottom up.
Caution!
–
Do not place anything on the cooking compartment
floor. Do not cover it with aluminium foil. A build-up
of heat could damage the appliance.
–
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The accessories have a locking function.The locking
function prevents the accessories from tilting when they
are pulled out.The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, make sure that
▯
the lug
¨
is pointing downwards
▯
the safety bar
©
on the wire rack is at the back and
on top.
Switching on
1
Set the required heating mode using the function
selector. The chosen heating mode and the default
temperature are displayed.
2
If you want to change the default temperature:
set the required temperature with the rotary
selector.
The preheating symbol
’
appears on the display. The
bar continuously shows the preheating status. When the
set temperature is reached, a signal sounds and the
preheating symbol
’
goes off.
Note:
The oven interior lighting stays switched off at a
temperature setting below 70°C
Switching off:
Turn the function selector to
0
.
Rapid heating
With the "Rapid heating" function, your appliance
reaches the temperature you require particularly quickly
in the "top heat", "bottom heat" and "top+ bottom heat"
types of heating.
To ensure an even cooking result, do not place your
food in the cooking compartment until "Rapid heating"
is complete and the heat-up symbol
’
has gone out.
Note:
The "Rapid heating" function is preconfigured in
the factory settings. You can select "Rapid heating"
’
or "Heat-up"
“
in the basic settings.
