Gaggenau BMP 225, User Manual

Page: 14 / 36

14
Sequential operation
With sequential operation, you can set up to five
different microwave output settings and grill settings
with cooking times to run one after the other.
Setting sequential operations
1 Use the function selector to set the required
microwave output or the full surface grill.
2 Touch the
C
symbol.
The "Sequential operation" menu is displayed.
3 Use the rotary selector to set the required
cooking time or grill setting.
4 Use
C
to select the second phase.
5 Use the function selector to set the required
microwave output or the full surface grill. Use the
rotary selector to set the required cooking time or
grill setting.
Note: You can set a stabilisation time between
two microwave outputs so that the temperature is
distributed evenly within the food. To do this,
touch the
6
symbol and set a time using the
rotary selector.
6 Use
C
to select the third phase.
7 Use the function selector to set the required
microwave output or the full surface grill. Use the
rotary selector to set the required cooking time or
grill setting.
8 Use
C
to select the
6
"Cooking time" function.
9 Set the desired cooking time using the rotary
selector.
10 Confirm with
™
.
The main menu for sequential operation is
displayed. The settings for each phase are shown
in the display.
11 Press
I
to start.
Operation starts. The cooking time starts
counting down in the display.
Once the cooking time has elapsed, the appliance
switches off. An audible signal sounds. The signal
stops when you touch the
™
symbol, open the
appliance door, or switch the function selector to 0 .
The sequential operation has finished.
Changing the settings of the current phase :
Touch the
H
symbol. The operation stops. Touch the
C
symbol and change the settings. Use the
™
symbol to
exit the menu. Press
I
to start.
Deleting the settings:
Touch the
'
symbol.
)XOOVXUIDFHJULOO