Gaggenau BMP 225, User Manual

Page: 12 / 36

12
Setting the microwave
1 The function selector is used to set the required
microwave output setting.
2 Set the cooking time using the rotary selector.
3 Touch
I
to start.
Operation starts. The cooking time starts counting
down in the display.
A signal sounds once the cooking time has elapsed.
The signal stops early if you touch the
™
symbol, open
the appliance door, or set the function selector to 0 .
Microwave operation has finished.
If you open the oven door during operation, the
microwave function is paused. After closing the door,
touch the
I
symbol. Operation continues.
You can change the cooking time at any time using the
rotary selector.
You can change the output at any time using the
function selector. Touch
I
to restart.
You can call up the elapsed cooking time using the
(
symbol. Touch
™
to return to the standard display.
Pause:
You can use
H
to pause operation. Touch
I
to continue
operation.
To switch off:
To end operation and delete the settings, set the
function selector to
0 .
Note: It is normal for the fan to continue operating
even when the door is open.
Full surface grill
In grill mode, you can select one of three grill
settings:
Setting the full surface grill
1 Set the full surface grill using the function
selector.
The
Q
full surface grill symbol and grill setting 3
appear in the display.
2 Use the rotary selector to set the grill setting.
If required, you can now set the cooking time for
your dish. Refer to the
Sequential operation
section.
3 Press
I
to start.
You can change the grill setting at any time using the
rotary selector.
You can change the operation mode at any time using
the function selector. Press
I
to restart.
Pause:
Operation can be paused with the
H
symbol. Use
the
I
symbol to continue.
Switching off:
To stop the operation and cancel the settings, turn the
function selector to
0 .
Safety shut-off
For your protection, the appliance is equipped with an
automatic safety shut-off. Any heating process is
switched off after 12 hours if the oven is not operated
in this time. A message appears in the display.
Confirm the message with
™
and set the function
selector to 0 , then the appliance can be operated
again as usual.
Heating function Grill setting Use
Q
Full surface
grill 1 (low) For soufflés and deep
bakes
2 (medium) For flat bakes and fish
3 (high) For steaks, sausages
and toast