17
6
Attach the extractor hood.
Adjust the height and align horizontally with the
adjusting screws.
Check that the 4 lower fixing holes have
been correctly marked. If required, mark again.
7
Remove the extractor hood. Drill the 4 lower
8 mm ø fixing holes and press in the wall plugs
flush with the wall.
8
Attach the extractor hood and screw into
position with the remaining 4 screws.
9
Stick protective film over the holes of the 2
lower mounting bolts in the protective grid.
10 Connect up the air outlet pipe.
11 Connect the hood to the electricity supply.
270
160
94
397
min. 600 Elektro
700 Gas
Empfehlung 700