18
Operating modes
This appliance can be used in exhaust-air mode or
circulating-air mode.
Exhaust air mode
Note:
The exhaust air must not be conveyed into a
functioning smoke or exhaust gas flue or into a shaft
which is used to ventilate installation rooms which
contain heating appliances.
▯
Before conveying the exhaust air into a non-
functioning smoke or exhaust gas flue, obtain the
consent of the heating engineer responsible.
▯
If the exhaust air is conveyed through the outer
wall, a telescopic wall box should be used.
Air recirculation
Note:
To bind odours in air recirculation mode, you
must install an activated carbon filter. The different
options for operating the appliance in air recirculation
mode can be found in the brochure. Alternatively, ask
your dealer. The required accessories are available
from specialist retailers, from customer service or
from the Online Shop.
Getting to know the appliance
Here, you can get to know your appliance and receive
information about the accessories.
Control panel
All function selection buttons are lit when they are
active. The "saturation indicator" control light flashes.
The air which is drawn in is cleaned by the
grease filters and conveyed to the exterior
by a pipe system.
The air which is drawn in is cleaned by
the grease filters and an activated carbon
filter, and is conveyed back into the
kitchen.
1
Switch for retracting/extending
2
Lighting
3
Control panel
4
Filter cover
@
Light on/off
œ
Saturation indicator
ž
Run-on function
Ž
Intensive setting
3 Fan speed 3
2 Fan speed 2
1 Fan speed 1
ÿ
Fan on/off
