Gaggenau AL400122, User Manual And Installation Instructions, Page: 10 / 24

en
Troubleshooting
10
8.15 Fitting the filter cover
1.
Grip the filter cover on the side with both hands.
2.
Slide the filter cover onto the bolts of the holder.
3.
Lift up the filter cover on the front side until it locks
into position.
9 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced with a special connection cable,
which is available from the manufacturer or his Cus-
tomer Service.
9.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working. The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
The appliance is not connected to the control unit.
▶
Connect the control unit to the appliance.
→
"Connecting the connection cables", Page 19
The appliance is not
working, all of the
buttons flash. The network-cable plug is not plugged in.
▶
Check the connection of the network cables for all of the appliances.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
An appliance component has failed.
▶
Call the after-sales service.
→
"Customer Service", Page 11
The appliance does
not retract. The filter cover is not closed.
▶
Close the filter cover completely.
→
"Closing the filter cover", Page 9
The button illumina-
tion does not work. The control unit is faulty.
▶
Call the after-sales service.
→
"Customer Service", Page 11
The LED lighting
does not work. Different causes are possible.
▶
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
▶
Call the after-sales service.
→
"Customer Service", Page 11
The saturation indic-
ator flashes. The grease filters are saturated.
▶
→ "Cleaning grease filters in the dishwasher", Page 9
▶
Clean the grease filters manually. → Page 9
Noises when retract-
ing or extending the
appliance. These noises are inherent in the design and have no effect on the how the appliance oper-
ates.
▶
This is normal.
No action required.