Gaggenau AL200180, User Manual And Installation Instructions

Page: 12 / 24

en
Troubleshooting
12
2.
Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
3.
Start the dishwasher.
Select a temperature of no more than 70 °C.
4.
Allow the grease filters to drain.
10.9 Cleaning the grease filter cartridge
Requirement:
The grease filters have been removed.
→ "Removing the grease filter", Page 11
1.
Clean the grease filter cartridge.
You can clean the grease filter cartridges by hand
or in the dishwasher.
2.
Observe the information regarding the cleaning
agents.
10.10 Fitting the grease filters
1.
Press ⁠.
a
The glass panel moves halfway down and the
grease filter cartridges are transported to the top.
2. Note:
The appliance frame is sensitive. Remove the
grease filter cartridges vertically. Do not pull the
grease filter cartridges over the appliance frame.
Remove the grease filter cartridges.
3.
Insert the grease filter into the grease filter cart-
ridges.
To avoid causing damage, do not bend the grease
filters.
4.
Carefully insert the grease filter cartridges.
5.
Press ⁠.
6.
a
The glass panel and the filter cartridges move
downwards.
a The appliance flap closes and the appliance
switches off.
11 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
11.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working. The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.