Gaggenau AA 490 111, Instruction Manual

Page: 10 / 48

10
Fan flap
m
Risk of burns!
The appliance will become hot during operation. Only
touch the fan flap on the marked area.
The ventilation elements can be opened and closed
independently of each other. Open the fan flaps above
whichever hotplates are being used.
Note: At least one fan flap must be open before the fan
will switch on.
Opening a fan flap
1 Press the area marked
"
on the fan flap.
2 This will unlock the fan flap and it will swing out to
the left.
Closing a fan flap
1 Swing the fan flap to the right.
2 Press the area marked
"
on the fan flap.
This will lock the fan flap.
Ventilation moulding
If the downdraft ventilation operates beside a gas-fired
appliance, a ventilation moulding AA 414 010 must be
attached when cooking. The ventilation moulding
improves the extraction behaviour for gas-fired
appliances. The ventilation moulding prevents small
flames from going out as a result of a draft.
Cleaning
m
Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
m
Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
m
Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Caution!
Risk of surface damage: Do not use these cleaners
‒ harsh or abrasive cleaning agents
‒ oven cleaners
‒ corrosive or aggressive cleaners, or those
containing chlorine
‒ cleaning agents with a high alcohol content
‒ hard and scratchy sponges, brushes or scouring
pads
If such an agent comes into contact with the appliance,
wash it off immediately with water.
Thoroughly wash out new sponge cloths before using
them!