Gage CompuScope 14100C, Hardware Manual And Driver Installation Manual

Page: 81 / 174

CompuScope 85GC 75
CompuScope 85GC specifications
PLEASE CHECK THE GAGE WEBSITE FOR THE MOST UP-TO-DATE SPECIFICATIONS.
SYSTEM REQUIREMENT
CompactPCI PICMG compliant system with the required number of free 6U slots; controller or PC with 128 MB
RAM, 50 MB hard disk and SVGA video.
SIZE
6U CompactPCI
Occupies one (1) slot
POWER (IN WATTS)
Worst Case Typical
+ 5 Volts 25.0 W 22.0 W
+ 12 Volts 12.0 W 10.0 W
CHANNELS 1 & 2
Number of inputs: 2
Connector: BNC
Impedance: 1
M
Ω
, 15 pF or 50
Ω
, software selectable
Coupling: AC or DC, software selectable
DC Coupled Bandwidth
All ranges except ±20 mV DC to 500 MHz
±20 mV DC to 300 MHz
Lower Frequency
AC coupled bandwidth: 10 Hz with 1 M
Ω
impedance
140 kHz with 50
Ω
impedance
Input Voltage Ranges:
1 M
Ω
Input: ±20 mV, ±50 mV, ±100 mV, ±200 mV, ±500 mV,
±1 V, ±2 V, ±5 V, ±10 V, ±20 V
50
Ω
Input: ±20 mV, ±50 mV, ±100 mV, ±200 mV, ±500 mV,
±1 V, ±2 V, ±5 V
Input Protection: Diode Clamped for 1 M
Ω
Thermal cut-off for 50
Ω
Resolution: 8 bits
Sampling Rate
GS/s: 5, 2.5, 1
MS/s: 500, 250, 100, 50, 25, 10, 5, 2.5, 1
kS/s: 500, 100, 50, 10, 5, 1
Absolute Maximum Input:
1
M
Ω
Impedance: ±30 Volts (continuous)
50
Ω
Impedance: ±5 Volts (continuous),
DC Accuracy: ±2% of full scale input,
derated at 0.025% per degree Celsius above 30 degrees Celsius