CompuScope 1220
9
CompuScope 1220 specifications
PLEASE CHECK THE GAGE WEBSITE FOR THE MOST UP-TO-DATE SPECIFICATIONS.
SYSTEM REQUIREMENT
PCI-based computer with at least one free full-length PCI slot, 128 MB RAM, 50 MB hard disk and SVGA
video.
SIZE
Plugs into one full-length PCI slot, 13” x 4.1”.
1 M Acquisition Memory
1 slot
4 M Acquisition Memory
2 slots
8 M Acquisition Memory
2 slots
64 M Acquisition Memory
3 slots
256 M Acquisition Memory
3 slots
512 M Acquisition Memory
3 slots
1 G Acquisition Memory
3 slots
POWER (IN WATTS)
+ 5 Volts
Acquisition
Memory Worst
Case
Typical
1M
25.0 W
17.5 W
4M
28.0 W
20.5 W
8M
28.0 W
20.5 W
64M
32.5 W
23.5 W
256M
32.5 W
23.5 W
512M
32.5 W
23.5 W
1G
32.5 W
23.5 W
Note: Power connector on the deep memory board of 64M, 256M, 512M and 1G models must also be connected
using a Y-cable.
CHANNELS A & B
Inputs per card:
2 single-ended inputs
Impedance:
1
M
Ω
, 35 pF or 50
Ω
, software selectable
Coupling:
AC or DC
Connector:
1 BNC per channel
Resolution:
12
bits
A/D Type:
Monolithic, 16 bit oversampling with decimation filter, operating in 12 bit mode
Input Voltage Ranges:
± 50 mV, ± 100 mV, ± 200 mV, ± 500 mV,
± 1 V, ± 2 V, ± 5 V, ± 10 V
Analog Bandwidth:
Input Range
-3dB Point
± 10 V
5 MHz
± 5 V
5 MHz
± 2 V
10 MHz
± 1 V
10 MHz
± 500 mV
10 MHz
± 200 mV
10 MHz
± 100 mV
10 MHz
± 50 mV
10 MHz