background image

615A-61 

OFFSET NOSE ASSEMBLIES

 

 

FOR 2000 SERIES CHERRYLOCK

®

 

RIVETS

 

DESCRIPTION

 

 

 

 

 

 

This is a mechanically shifting offset nose assembly designed for installing Cherrylock® 2000 series rivets up to 1/2" grip length in limited access 
areas. There is a separate nose assembly required for each head style (universal and countersunk) and each shank diameter. These nose as-
semblies should not be used on bulbed Cherrylock® rivets larger than 5/32" diameter 

These nose assemblies fit directly on the GB715 Installation Tool 

 

(See installation instructions for attaching to GB784 Tool on page 4)  

*Do NOT use GB784 to install 1/8” CherryLOCK rivets. For 5/32”-1/4” only 

44766 Centre Court Clinton Twp. MI 48038 USA 

 

Ph: +1 (586) 226-1500  Fax: +1 (586) 226-1505  

[email protected] / www.gagebilt.com

 

GAGE BILT

 

        MADE in USA

 

 

 

DIAMETER

 

 

 

NOSE ASSEMBLY

 

*1/8"

 

 

 

*4U-615A-61 Universal Head

 

 

 

*4C-615A-61 Countersunk Head

 

 

 

5/32"

 

 

 

5U-615A-61 Universal Head

 

 

 

5C-615A-61 Countersunk Head

 

 

 

3/16"

 

 

 

6U-615A-61 Universal Head

 

 

 

6C-615A-61 Countersunk Head

 

 

 

1/4"

 

 

 

8U-615A-61 Universal Head

 

 

 

8C-615A-61 Countersunk Head

 

Summary of Contents for 2000 Series

Page 1: ... than 5 32 diameter These nose assemblies fit directly on the GB715 Installation Tool See installation instructions for attaching to GB784 Tool on page 4 Do NOT use GB784 to install 1 8 CherryLOCK rivets For 5 32 1 4 only 44766 Centre Court Clinton Twp MI 48038 USA Ph 1 586 226 1500 Fax 1 586 226 1505 solutions gagebilt com www gagebilt com GAGE BILT MADE in USA DIAMETER NOSE ASSEMBLY 1 8 4U 615A ...

Page 2: ...04 14 1 Spacer 55402 55402 55402 55402 55402 55402 55402 55402 15 1 Jaw Spring 50410 50410 50410 50410 50410 50410 50410 50410 16 1 Washer 50411 50411 50411 50411 50411 50411 50411 50411 17 1 Retaining Ring S405 S405 S405 S405 S405 S405 S405 S405 18 1 Outer Anvil 10439 10440 10546 10547 10673 10674 10859 10860 19 1 Set Screw S924 S924 S924 S924 S924 S924 S924 S924 20 1 Rocker Arm 60408 60408 60408...

Page 3: ...ld up and keep the anvil from going all the way forward to set the locking collar in the rivet An occasional application of good grade high pressure grease such as Lubriplate 130AA to the bottoms of the drawbolt and rocker arm will prolong the life of these parts ADJUSTING NOSE ASSEMBLY These nose assemblies are factory adjusted to properly install rivets in the A Group shorter lengths If nose ass...

Page 4: ...tomer THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING MERCHANTABILITY WARRANTY Cherrylock is a registered trademark of Cherry Aerospace Fasteners Lubriplate is a registered trademark of Friske Brothers Refining Co INSTALLATION INSTRUCTIONS FOR ATTACHING TO GB715 TOOL 1 Make sure the head piston of the tools is in its full forward position 2 Connect power tool t...

Reviews: