GADLEE GTS 1250, Operator'S Manual

Page: 32 / 40

ENGLISH
12
When emptying the bin, always wear a mask to protect the respiratory tract from
the dust which is always present during this operation.
i INFORMATION
Before empting the debris bin, operate the filter shaker for 30 seconds to clean the
filter
Before emptying the bin, make sure all machine functions are turned off;
•
Move to the waste container.
•
Pull lever (fig. B, ref. 4) that locks/releases the bin
•
Pull out the bin by handle and empty it.
•
Refit the bin and lock it in place with lever (fig. B, ref. 4).
•
To collect bulky solid debris, raise the flap by pressing the pedal (fig. H, ref. 1). As far
as possible, you should, however, avoid using the sweeper with the flap raised as
cleaning efficiency is reduced.
Flap raiser
•
Move the machine to the parking area.
Stopping:
•
Release the machine movement pedal (fig. A, ref. 3) and press brake pedal( fig. B,ref.
3) to stop machine moving
•
Turn the side brushes off by turn the side brush lever to “OFF” position (fig. P).
•
Turn the centre brush off by pull the main brush lever to “STOP” position (fig. D, ref. 1)
•
Turn the suction fan off by pressing the switch (fig. D, ref. 2) to neutral position .
•
Turn the key switch (fig. C, ref. 1) to the "OFF" position.
7.
PERIODS OF INACTIVITY
•
Disconnect the batteries. To optimise the working life of the battery, it should be
charged every 30/40 days. If the level of solution is low, top up with distilled water.
•
Empty the debris bin.
•
Clean the machine in general, see chapter MAINTENANCE INSTRUCTIONS.
•
Clean the suction filter.

IMPORTANT
If you do not charge the batteries regularly, they may be irrevocably damaged.
8.
MAINTENANCE INSTRUCTIONS
!
DANGER
Never perform any maintenance operations without first disconnecting the
batteries from the machine's electrical circuit.
Maintenance on the electrical circuit and all other operations not explicitly
described in this manual must be performed by specialised personnel only, in
compliance with current safety legislation and as described in the maintenance
manual.
8.1. Maintenance - General rules