5. Driving Directions
5.4.2
Cruise Control System *
The cruise control system can be set at
40km/h or higher. Once the speed is set, the driver
can release the accelerator pedal and the vehicle
will run at the preset speed.
Warning
•
To avoid accidents, the cruise control system
cannot be used where there is dense traffic,
hills, winding roads, or slippery roads.
•
Use the cruise control system carefully. Make
sure that the vehicle has a safe distance from
the front one after the speed is set.
•
The cruise control system shall be shut down
timely after stopping cruise control.
Operation Button
1.
: Enable/disable cruise
2.
: Stop cruise control
3. SET/-:
Activate
the
cruise
control
function/deceleration
4. RES/+:
Restore
the
cruise
control
function/acceleration
Enable cruise
–
Short press the button to turn on the cruise
control system. Then the indicator light on
the instrument cluster goes on in white.
–
Increase the speed to more than 40 km/h.
–
Short press the button “SET/-”. The indicator
light
on the instrument cluster turns to
green and the vehicle enters the cruise control
state. Then release the accelerator pedal.
Stopping Cruise Control
The following operations will disable cruise control:
–
Step on the brake pedal.
–
Short press the button
(stopping cruise
control but retain the set speed).
–
Short press the button
(stopping cruise
control and clear the set speed).
–
Lift the EPB button
–
ESP system starts.
193
183
Summary of Contents for GS5
Page 6: ......
