88
4. Operation of systems and equipment
②
Intelligence
- Click “Intelligence” to turn on the
intelligence mode of seat ventilation.
③
Off
- Click “Off” to turn off the seat ventilation
function.
CAUTION
● Do not kneel on the seat or apply
pressure to a point on the seat cushion
or seat back, so as to avoid damaging
the electrical components in the seat.
● If it is found that the seat fan does not
work after the seat ventilation function is
turned on, immediately turn off the seat
ventilation function and go to the GAC
Motor authorized shop for inspection
and repair in time.
4.4.3 Rear seat
Rear seat back folding down / reset
Folding down:
- Pull the seat back switch
①
towards the
front of the vehicle and turn the seat back
forward to recline the seat back.
Reset:
- Push the rear seat back directly backward
until the seat back is locked.
Seat ventilation*
Set the ENGINE START/STOP button to
“ON” position, and click the AV system tool
bar
OFF
OFF
, so that the seat ventilation setting
interface will pop up.
①
Ventilation
- When you click “Ventilation”, the seat
ventilator will work in the 3rd ventilation
level by default, and you can click the key
1/2/3 to adjust the heater to the desired
ventilation level.
- The seat ventilator has three ventilation
positions, among which the 3rd position
has the highest fan speed followed by the
2nd position, and the 1st position has the
lowest fan speed.
