72
4. Operation of systems and equipment
Turn signal lamp
-
When the ENGINE START/STOP button
is in the “ON” position, if you turn the
lamplight combination switch up or
down to the limit position
①
and turn
on the right or left turn signal lamp, the
corresponding indicator lamp or on
the instrument cluster will flash.
Turn signal lamp flashing for lane change
-
In case of lane changing or overtaking, if
you quickly turn the lamplight combination
switch up or down to the position
②
and
then release it to the original position, the
corresponding turn signal lamp and the
indicator lamp or on the instrument
cluster will flash 3 times.
-
If you turn the lamplight combination
switch up or down and hold it at the
position
②
, the corresponding turn
signal lamp and the indicator lamp
or on the instrument cluster will flash
continuously. Releasing the switch to the
original position can stop the flashing.
CAUTION
If the corresponding indicator lamp or
on the instrument cluster flashes faster,
one of the turn signal lamps may be faulty,
please go to the GAC Motor authorized
shop for inspection and repair in time.
Lamplight switch
When the ENGINE START/STOP button is
in the “ON” position, turn the lamplight switch
①
to activate or deactivate AUTO (automatic
headlamp on/off function)*,
(position lamp),
and (low beam).
When the lamplight switch is turned to the
“OFF” position, all lamps will go out.
