71
4. Operation of systems and equipment
Turn signal lamp
-
When the ignition switch is in the
“ON” position, if you turn the lamplight
combination switch up or down to the
limit position
①
and turn on the right or
left turn signal lamp, the corresponding
indicator lamp or on the instrument
cluster will flash.
Turn signal lamp flashing for lane change
-
In case of lane changing or overtaking, if
you quickly turn the lamplight combination
switch up or down to the position
②
and
then release it to the original position, the
corresponding turn signal lamp and the
indicator lamp or on the instrument
cluster will flash 3 times.
-
If you turn the lamplight combination
switch up or down and hold it at the
position
②
, the corresponding turn
signal lamp and the indicator lamp
or on the instrument cluster will flash
continuously. Releasing the switch to the
original position can stop the flashing.
CAUTION
If the corresponding indicator lamp or
on the instrument cluster flashes twice
as fast as before, it indicates that one of
the turn signal lamps may be faulty, and
in this case, please go to the GAC Motor
authorized shop for inspection as soon as
possible.
Lamp switch
When the ignition switch is in the “ON” position,
turn the lamp switch
①
to turn on or off
(position lamp), and
(low beam).
When the lamplight switch is turned to the
“OFF” position, all lamps will go out.
