112
4. Operation of systems and equipment
4.6.4 OTA update*
Available update reminder
-
When an update is available, an update
prompt window will pop up automatically
when the ignition switch or ENGINE
START/STOP button is set to “OFF”.
-
Click “Update” to open the system update
window; if the APP is currently the latest
version, “This APP is currently the latest
version” will be displayed.
Interface reminder display
-
When the system detects a new version,
the “System Settings” will show an update
mark.
-
Click this mark to enter “System Settings”.
When there is a new version, the page
“System Information” will show an update
mark.
-
Click this mark to enter “System
Information”. When there is a new version,
the “update” button in the page will show
an update mark.
Update operation
Update appointment
System update
It takes 1 hour and 15 minutes. Check the details>
During updating, please keep the vehicle in the "Parking (P-gear and engine
shut down)" state, so the vehicle cannot be used then. It is recommended to
perform an update when the vehicle is not to be used in a short term.
Update now
Appoint the
update time
No more reminder is
needed
1. Click “Update appointment” to set the
update time. If the vehicle meets the
update conditions at the set time, the
update will be automatically performed.
NOTE
The appointment adopts a 24-hour system.
If the set time is earlier than the current
time, it will be postponed to the next day.
Your update appointment has expired.
Please make a new appointment.
Make a new appointment
Close
2. Update appointment reminder
-
After making an appointment for an
update, a window will always pop up to
prompt that there is an appointment for an
update every time the engine is started.
-
In 15 minutes before the set time, if the
gearshift lever is in the P position, a
window will pop up to prompt that there is
an appointment for update.
