GAC MOTOR EMPOW, Manual, Page: 304 / 356

298
6. Operation and maintenance
Replacing the reversing lamp bulb
1. Switch off the vehicle power supply.
2. Open the trunk lid.
3. Pry off the fixing plastic nail as arrowed,
and lift off the trunk lid trim.
1. Rotate counterclockwise and take out the
reversing lamp holder and bulb ① .
2. Pull out the reversing lamp bulb ② from
the reversing lamp holder.
3. Replace the original bulb with a new
reverse lamp bulb in the reverse order.
6.7 Wheels
WARNING
Within the first 500 km, the road
adhesion of new tires is unlikely to
reach the best condition. Therefore,
the vehicle shall be drove carefully at a
moderate speed to prevent accidents.
● Inadequate road adhesion of tires
not subject to running-in period or
excessively worn can directly affect
the braking effect.
● If abnormal vibration or deviation of
the vehicle is found during driving,
stop the vehicle immediately and
check whether the tire is damaged.
● In case of uneven and excessive tire
wear, please go to the GAC Motor
authorized shop for inspection and
repair in time.