12 |
P a g e
VARIABLE GAIN ADJUSTMENT AND LED INDICATORS
•
AC Power LED - Illuminates when the AC voltage is supplied, the unit is ON, and the
AC/DC power supply is operating.
•
DL ALC LED - Illuminates when DL composite power reaches the ALC set
•
DL Alarm - Illuminates when the DL amplifier fails.
•
UL ALC LED - Illuminates when UL composite power reaches the ALC set.
•
UL Alarm - Illuminates when the UL amplifier fails.
•
External DC LED (optional) - Illuminates when the BDA is operating from a DC source.
•
Oscillation detection LED (optional) - Illuminates when oscillation is detected.
•
Donor antenna alarm LED (optional) - Illuminates when Donor Antenna is disconnected.
•
Mobile antenna alarm LED (optional) - Illuminates when the mobile port is disconnected.
•
DL Manual Gain Attenuator- Is a switch used for DL gain attenuation
•
UL Manual Gain Attenuator- Is a switch used for UL gain attenuation
Figure 5: External LED Indication and Manual Gain Attenuation Access
