G-Tek Corporation Pvt. LTD
4
Introduction
1.
I
NTRODUCTION
This manual is written to help the user to get familiar with the installation and operation of LM Pro RF.
It is designed for reliable and convenient recording of process parameters in production, Research and
Quality control applications. This device can sense the Temperature and Humidity, displaying them on
LCD display ae well as sending these data via RF signal to Moderator device for monitoring on
gtekNetTM.
1.1
M
ANUAL
L
AYOUT
This manual is divided into sections for quick and easy reference.
Table 1 Manual Layout
Section 1 Introduction
This gives outline of the manual, brief description about the LM Pro
RF, features available and how to unpack it.
Section 2 Installation
This section gives the details of the Electrical installation.
Section 3 Operation
This section describes the operation of LM Pro RF and the output
status on the LCD display.
Section 4
Troubleshooting Guide
This section describes about the most frequently asked questions
and their solutions about LM Pro RF.
Section 5 Accessories
This section shows the standard accessories for the LM Pro RF.
Section 6 Specification
It describes the detailed specification of the LM Pro RF.
Section 7 Ordering Code
It describes the details of order code and comparing it with the
code on the LM Pro RF, user can find out the installed options.
1.2
LM
P
RO
RF
D
ESCRIPTION
The LM Pro RF series of wireless data logger is a new RF based data logger measuring temperature
and % RH. These data loggers are very useful in monitoring data across large facilities where wiring is
difficult. Since no wiring is required, deployment is very quick and easy. Data are sent by each device
directly to the centralized moderator (repeater) device and from there to gtekNetTM software over
ethernet port. These data can be accessed from any network connected device using standard web
browser.
The data logger consists of RF radio transmitter and receiver operating at 869.88 MHz (SRD License
Free: EU Version) frequency. These data loggers form a star network with its moderator. The
moderator is connected to the client-server based gtekNetTM software through ethernet. A new data
logger when it is in the range of the central node
–
moderator, gets easily connected to the gtekNetTM.
Each device transmits its data to the moderator and is captured in gtekNetTM. Any parameter of the
data logger when set / changed from gtekNetTM, first goes to the moderator and then to the device.
These data loggers have an internal memory of 32000 data sets. In the event of communication failure
between moderator and device or moderator and gtekNetTM, after reconnection, all the missed data
will be synchronized by gtekNetTM automatically. This ensures that no data is missed.