background image

 

  

G-SATA Installation Guide 

 

Page 14 

10. LIMITED WARRANTY 

G-Technology Inc. (G-Tech) warrants your product against any 

defect in material and workmanship, under normal use, for 
the designated warranty period.  If the product should 

become defective within the warranty period, G-Tech, will at 
its discretion, repair or replace the product.  Repair or 

replacement parts or products will be furnished on an 
exchange basis and will be either new or reconditioned.  All 

replaced parts or products shall become the property of G-
Tech. This warranty shall not apply if the product has been 
damaged by accident, misuse, abuse or as a result of 

unauthorized service or parts. Warranty service is available to 
the purchaser by obtaining a Return Material Authorization 

number (RMA) and by delivering the product during the 
warranty period to an authorized G-Tech service facility or to 

G-Tech. The purchaser shall bear all shipping, packing and 
insurance costs and all other costs, excluding parts and labor, 

necessary to effectuate repair, replacement or refund under 
this warranty. All returned product must be shipped to  
G-Tech in the original shipping container. 

 

For more information on how to obtain warranty service, an 

RMA number or to acquire shipping materials, contact G-Tech 
at 16

53

 Stanford Street, Santa Monica, CA 90404, (310) 449-

4599 or 

[email protected]

 

IN THE EVENT A PRODUCT BECOMES DEFECTIVE DURING 
THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE 
REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED 

ABOVE. INCIDENTAL OR CONSEQUENTAL DAMAGES, 
INCLUDING WITHOUT LIMITATION LOSS OF DATA, ARISING 

FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ARE 
NOT THE RESPONSIBILITY OF G-TECH AND, TO THE EXTENT 

PERMITTED BY LAW, ARE HEREBY EXCLUDED BOTH FOR 
PROPERTY DAMAGE, AND TO THE EXTENT NOT 

UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE.

 

 

 
 

 
 

 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

(This page intentionally blank) 

 

 
 

 
 

Summary of Contents for G-SATA















Reviews: