G-Tech Pro Competition User Manual Download

Page: 107 / 180

106

G-TECH / Pro Competition User Guide, Release 3.1

Setting the Distance Marks

Have you ever wondered at what point you reach a certain
distance during an acceleration run?

With the G-tech’s Distance Marks feature, now you will
know.

There are three distance marks:

•

60 ft. mark

•

1/8 mile mark

•

1/4 mile mark

Each of these marks can be individually enabled or disabled.

When you have a distance mark enabled, and the vehicle has
reached that distance, the G-tech illuminates the upper right
LED for one second.

For example, if you have all three distance marks enabled,
and you do a full 1/4 mile acceleration run, the upper right
LED turns on three times during the run.

Start in

Configuration Mode

and select “Run

Parameters”.

Select “Distance Marks”.

Summary of Contents for Pro Competition





















































































































































































Search results

Summary of Contents for Pro Competition

Reviews:

Related manuals for Pro Competition

Brands by name

Popular brands

G-Tech Pro Competition, User Manual

Search results

Summary of Contents for Pro Competition

Reviews:

Related manuals for Pro Competition

Brands by name

Popular brands