Firmware 2.25 version for GSC-3 and GSC-2
New functions:
- added two SWITCH outputs working modes for amp controlling,
Amp controlling
Controller enables the SWITCH outputs to work on
SF1
– latching type mode,
SF2
– pulse mode and
SF3
– momentary switch mode or
SF-4
and
SF5
- mixed modes
(see SWITCH button settings, footswitch
No 8). Mostly used mode is the
SF1
- latching type mode. In this mode the indicators SWITCH 1 to 4 lit
what means contact short-circuit of corresponding relay. Other modes are applied in selected amp models
for which is required other functionality of outputs. In case of controlling the amp with momentary switch
input (
SF3
mode) the amp should have the switch which enables switching the functions in order to
synchronize the controller and the amp states.
SWITCH button settings
Footswitch No. 8 (by successive pressings) enables to set the SWITCH 1 to 4 working modes
according to the table below.
8
SF1
SWITCH function 1
– SWITCH 1 to 4 outputs in latching mode (closed or
open state)
SF2
SWITCH function 2
– SWITCH 1 to 4 outputs in pulse mode (closed for 80 ms)
SF3
SWITCH function 3
–SWITCH 1 to 4 outputs in momentary switch mode (closed
for 80 ms)
SF4
SWITCH function 4
– SWITCH 1, 2 and 3 outputs in the pulse mode (closed for
80 ms), the SWITCH 4 output in the momentary switch mode (closed for 80 ms)
SF5
SWITCH function 5
– SWITCH 1 and 2 outputs in the pulse mode
(closed for 80
ms),
the SWITCH 3 and 4 outputs in the momentary switch mode
(closed for 80 ms)
