20
•
Always unplug the device after use and during a power failure.
•
Always place the device on a flat and stable surface.
•
Ensure the ventilation roster on the back of this device is never cov-
ered, and take care that the device will have at least 15 cm of room on
each side to ensure proper heat-dissipation so the device is prevented
from overheating.
•
Never cover the device on any side.
•
Always allow the device to cool down for 15 minutes before you clean
or store it.
•
Never use the device if the filter, the plug or the power cord is dam-
aged in any way.
•
Never attempt to replace the lamp, the filter or the power cord your-
self in case either is damaged or no longer functional, but contact our
service department.
•
Always carry the device by the handle if you want to move it or adjust
the angle during use.
•
Attention: The glass of the filter will get very hot during use.
•
Never use scouring pads, polish or aggressive fluid such as petrol or
aceton to clean the device. Clean the device with a soft cloth. If a dis-
infectant is needed we advise to put a few drops of denatured alcohol
on the cloth.
•
Ensure you will drink adequately if using the device. Due to the in-
creased body heat caused by this device the body will lose moisture
at a higher rate. If you expose yourself to multiple treatments each
day you should increase your fluid intake.
•
Always consult your doctor or medical advisor before using this lamp
if you have a serious condition.
•
Ensure the power cord does not come into contact with the filter while
or right after the device is used, to prevent damage to the power cord.
FW-300-manual-NL-FR-DE-EN-v1.2.indd 20
13-5-2015 11:13:56
