background image

FKW-248

SETUP

Slide the switch 

to OFF (down).

A

Slide the switch 

to OFF (down).

B

Insert 1.5V AA battery 

into the clock  

(+ to the right).

C

Insert 2x 1.5V C batteries 

into the battery compart-

ment (+ to the left).

D

DAG

DA

TUM

MAAND

Instellen:

1.  zet power schakelaar 

op OFF

2.  stel tijd in

3.  stel dag in

4.  stel datum in

5.  stel maand in

6.  stel jaar in

7.  zet power schake-

laar op ON

Bij schrikkeljaar en zomer/

wintertijd de klok handmatig 

aanpassen

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

 

 

Hesdo bv., Aziëlaan 12, 5232 BA,

‘s-Hertogenbosch, The Netherlands

FKW-248

Jumbo Analoge Klok

Power:

clock: 1x 1.5V AA

date: 2x 1.5V C

p.d. 

MMYY

v1.0

Attention: the day appears 2x consecutively. Stop the first time it appears 

when it’s currently before 12 o’ clock noon. If it’s after 12 o’ clock noon, 

turn a little further until the day appears for the 2nd time.

Turn anti-clockwise 

(e.g. towards your 

body) to set the day.

20.

5   

  5.

3

IN

OUT

°

C

°

C

1. Getting started:

2. batteries in the outdoor sensor:

3. Time setup:

4. Day setup:

Use the small red wheel to set the 

actual time, for now it doesn’t matter 

whether it’s before or after noon time.

DAG

DA

TUM

MAAND

Instellen:

1.  zet power schakelaar 

op OFF

2.  stel tijd in

3.  stel dag in

4.  stel datum in

5.  stel maand in

6.  stel jaar in

7.  zet power schake-

laar op ON

Bij schrikkeljaar en zomer/

wintertijd de klok handmatig 

aanpassen

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

 

 

Hesdo bv., Aziëlaan 12, 5232 BA,

‘s-Hertogenbosch, The Netherlands

FKW-248

Jumbo Analoge Klok

Power:

clock: 1x 1.5V AA

date: 2x 1.5V C

p.d. 

MMYY

v1.0

20.

5   

  5.

3

IN

OUT

°

C

°

C

Slide the battery cover off 

the outdoor sensor

Insert 2x AA 1.5V

batteries

Slide the battery cover 

back into the outdoor 

sensor

Placing the batteries into the outdoor sensor must be 

done 

within 1 minute

 after inserting the 1.5V C 

batteries into the clock. The outdoor sensor will then be 

linked directly with the clock.

If it takes longer before you place the batteries into the out-

door sensor, the sensor won’t be linked with the clock and 

the ‘OUT’ read-out will remain empty.

In this case, remove both the batteries from the outdoor 

sensor and the C batteries from the clock and then re-insert 

all of them within one minute.

Reviews: