FXA FXAJ1XL-DU11-210, Instruction Manual

Page: 13 / 92

13
COMPONENTS & CONTROLS (FIG 1 & 1A) UNPACKING
Caution! This packaging contains sharp objects. Take
care when unpacking. Remove the machine, together
with the accessories supplied, from the packaging.
Check carefully to ensure that the machine is in good
condition and account for all the accessories listed in
this manual. Also make sure that all the accessories
are complete. If any parts are found to be missing, the
machine and its accessories should be returned
together in their original packaging to the retailer.
Do not throw the packaging away, keep it safe
throughout the guarantee period, then recycle if
possible, otherwise dispose of it by the proper means.
Do not let children play with empty plastic bags due
to the risk of suffocation.
ACCESSORIES
Only fit genuine replacement parts which comply with
the speed and fit of the power tool.
The FXAJ1XL-DU11-210 comes with the following
accessories:
• 48 Teeth blade (fitted)
• Dust bag
• Work clamp
• Side extension arms (x 2)
• 6mm saw blade allen key
ASSEMBLY
Note: Before carrying out any assembly or
disassembly of the unit please ensure that the unit is
not connected to the electrical supply.
TRANSPORTATION (FIG.2)
Lift the mitre saw only when the saw arm is locked in
the down position, the saw is switched off and the
plug is removed from the power socket. You must
only lift the saw by the carrying handle or outer
castings. Do not lift the saw using the guards. If the
carrying handle is not installed, attach to the machine
using the 2 screws provided.
BENCH MOUNTING (FIG.3)
The saw base has 4 mounting holes to facilitate bench
mounting. Attach the saw to a level, horizontal bench
or work table using bolts (not supplied) though the
fixing holes in the saw base.
NOTE. If desired, you can mount the saw to a piece of
8 mm or thicker plywood which can then be clamped
to your work support or moved to other job sites and
reclamped.
CAUTION. Make sure that the mounting surface is not
warped as an uneven surface can cause binding and
inaccurate sawing.
1. Dust bag
2. Dust extraction port
3. Carrying handle
4. Laser light on/off switch
5. Release latch
6. Upper fixed blade guard
7. Blade bolt
8. Rotating blade guard
9. Mitre table
10. Table insert (kerf plate)
11. Mitre lock handle
12. Mitre lock release latch
13. 6mm Allen key
14. Side extension arm (left)
15. Side extension arm (right)
16. Clamp assembly
17. Side extension arm (x 2)
18. Clamp assembly lock (x 2)
19. Side support bar locking screw
20. Bevel lock
21. Slide bars
22. Table fence
23. Side support bar location holes (2 sets)
24. Mitre scale
25. Operating handle
26. On/off trigger switch
27. Trenching depth lock nut
28. Trenching depth adjustment screw
29. Slide lock knob
30. Stabiliser
31. Release knob
32. Laser assembly
33. Bevel scale
34. 0° Bevel adjustment screw
35. Spindle lock button
36. Carbon brush cover