Wire it up - DC only version
There are GND connections for both jacks at either end of the board.
All the GND pads are connected to each other in the traces on the PCB,
and all of them are connected to both sides of the board.
For your convenience there is a GND pad for every required connection.
This circuit is standard, Negative GND. Your power supply should be Tip
Negative / Sleeve Positive. That’s the same as your standard pedals
(Boss etc), and you can safely daisy-chain your supply to this pedal.
L
E
D
BOARD
OUT
BOARD
9V
BOARD
GND
BOARD
GND
BOARD
GND
BOARD
INPUT
+
IN
OUT
L
E
D
BOARD
GND
BOARD
LED+
