BDA Akku Heckenschere 120V EA524_rev01
20
liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
Distractions can
cause you to
lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching
outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will
increase the
risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool.
Keep cord away from heat, oil, sharp edges and moving parts.
Damaged or entangled
cords
increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor
use.
Use of a
cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
A
moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment.
Always wear eye protection. Protective equipment
such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions
will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power
source and/or battery pack, picking up or carrying the tool.
Carrying power tools with
your finger
on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a
key left
