Futuro Futuro
Futuro Futuro
RANGE HOOD
INSTALLATION MANUAL
MODEL:
SAVONA CEILING
NOTE: PRIOR TO INSTALLATION
Please inspect range hood visually,
as well as connect it to power supply
and test its operation.
35 1/2”
24”
18”
2 1/4”
2 1/4”
6 7/8”
25 1/2”
4 1/4”
4 7/8”
8 7/8” diam.
6” diam.
4 1/4”
34 5/8”
22 5/8”
34”
35 1/2”
10 7/8”
10 5/8”
8 1/4”
3/16”
2 3/8”
10 1/2”
10 1/2”
13”
34 5/8”
22 5/8”
25 1/2”
18”
NOTE: Inch dimensions are approximate, and
given for reference / convenience only.
Always measure the actual items on-site and
make drilling / cutting marks according to
actual materials & measurements - not estimates.
GENERAL DIMENSIONS
1
34”
4 5/8”
4 5/8”
24”
3/16”
13”
1.) The outer panel is held in place by magnets.
To open the panel, pull down on the edge of the panel,
in BOTH of the indicated spots - in order to avoid
potentially warping the panel.
1.) Remove mounting bolts from hood.
2.) Place retaining frame against ceiling,
mark locations of screw holes, and drill holes.
NOTE: for concrete or masonry ceilings,
use plastic anchors as necessary.
3.) Secure retaining frame
to ceiling with mounting bolts.
PREPARATION
INSTALL RETAINING FRAME
2
2.) Remove filter panels
(2 on 36” version, 4 on 48” version)
& remove screws as shown.
3.) Disconnect blower cable.
4.) Close cover panels.
5.) Separate the retaining frame
(upper portion) from the
hood body (lower portion).
3
