Operators and Technicians Manual
©
2002 – 2007 FutureLogic, Incorporated. All Rights Reserved.
MNL Page 2 of 52 12/07/2007
MNL-000003 REV.N
2
Operator Interface
Introduction
This chapter covers various operations of the GEN2 printer including loading paper and
clearing a paper jam.
Operator Indicators and Controls
The printer is equipped with status indicators and a FEED button, which allow you to manage
and interpret the operations of the printer.
The status indicators are:
•
The front bezel light
•
Keypad lights:
•
Ready – Green
•
Paper – Yellow
•
Open – Orange
•
Fault – Red
The following figure illustrates the location of these indicators and controls.
Figure 2-1
Operator Indicators and Controls
Status Lights
and Keypad
with FEED
button
Lid
Release
Lever
Paper
Loading Slot
