8A083X30 Rev.11
APX Series P25 Interface
DVRS
User’s Guide
January 2019
Page 59 of 94
Remote DVR Activation and Steering by PSU Call Alert (Page)
A P25 PSU may be programmed to send a Call Alert (Page) and preprogrammed
Network ID (NID) to a specific DVRS and thereby remotely change:
•
DVRS Mode (from OFF or Local to System)
•
DVR Status (Secondary / Primary)
•
Selected TG / Channel on MSU
NOTE:
Remote change of MSU Mode has no effect on the operation of the rest of the PSUs in
the area since the TG Proxying feature allows multiple TG operation. This applies to
Mode change within the same system, and when TG Translation is not enabled
The DVRS is addressed by sending a call alert (page) with the specific programmed
DVRS’ ID.
NOTE:
All DVRS should have unique IDs programmed in the digital mode settings menu if the
remote control feature is to be used. If no DVRS ID is programmed, the DVR will
assume the ID of the MSU currently interfaced to it. Remote activation and steering are
supported when the MSU ID = DVR ID.
The remote DVR status change will not be successful if there is another Permanent
Primary already present in the area (see
