Future Design MCT-CM, User Manual

Page: 76 / 247

MCT-CM
76
5 Basic Operation
This section is designed to help guide the user through the MCT touch screen interface and menu structure in
order to navigate through the various operation, monitor and setup screens and gain an understanding of how
to use them. Subsequent sections of this manual are tailored to the special features and functions of the MCT.
Consult those sections of the manual for further information and specifics on how to set up and operate them.
5.1 OEM Configuration Options
The availability of certain menu items, screens and the functionality of the MCT are determined by the
configuration of the controller. This manual covers all available options, some of which may not be available
on your system.
If there are questions or concerns about the operation and available options on your MCT controller,
contact your OEM for further information. Only your OEM can address equipment related issues.
5.1.1 OEM Control Loop Configuration Options
If a loop is configured for cascade control, it may appear as a normal control loop on the MCT; however, this
type of loop is operated by another control loop on the MCT. The set point of the cascade loop cannot be
changed by the user. It is a calculated set point generated by the other control loop. If you suspect that there
is a problem with your MCT controller if you are unable to change a loop set point, contact your OEM and verify
the configuration of your system to determine if the loop is operating under cascade control and how that
interacts with your equipment.