Future Design MCT-CM, User Manual

Page: 158 / 247

MCT-CM
158
10 Offline
The Offline settings do not include the OEM setup of the MCT. Refer to the documentation provided by your
OEM regarding the MCT configuration. In order to enter offline setup, automated ramp/soak program operation
and data logging must be manually stopped.
NOTE: Upon entering offline setup, all MCT digital and analog outputs will be turned off.
To assist in setup and documentation of the MCT
, see the “MCT Configuration and Worksheets” Excel file provided on the Future
Design Controls website ( http://www.futuredesigncontrols.com/MCT.htm ). This document provides setup and configuration
forms and templates for all MCT features including those provided under Offline Setup.
The offline menu provides navigation to the following functions:
View menu
Settings: Navigation back to the online settings menu.
Service: View output operational data (cycles, hours on).
Options: Settings for system output maintenance data.
Set menu
Units: Setting for temperature units.
Clock: Settings for system date and time
Language: Settings for menu and help language text.
Hardware menu
Analog Input: Settings for optional analog input operation.
Analog Output: Settings for optional analog output operation.
Digital Input: Settings for digital input operation.
Digital Output: Settings for digital output operation.
Monitor: View current digital input status (troubleshooting).
Force: Force digital outputs on (troubleshooting).
Calibrate menu
Offset: Settings for optional monitor offset calibration.
System menu
Display: Access to display calibration and backlight settings.
Configuration: Access to MCT import/export utility.
About: View current firmware/software version numbers.
Exit: Exit MCT application and access to the
MCT configurator.