Future Design MCT-CM, User Manual

Page: 136 / 247

MCT-CM
136
9 Device Settings
This section covers the use of extended controller features that enhance the functionality of the system. To
gain access to the MCT setup options, select
“Settings” from the home Device menu.
To assist in setup and documentation of the MCT
, see the “MCT Configuration and Worksheets” Excel file provided on the Future
Design Controls website ( http://www.futuredesigncontrols.com/MCT.htm ). This document provides setup and configuration
forms and templates for all MCT features including those provided under the Setup menu.
The Device Settings menu provides navigation to the following functions:
View menu
Defrost: Provides access to defrost settings.
Redundancy: Provides access to redundancy settings.
Tuning: Provides access to loop tuning parameters.
Set menu
Alarms: Provides access to the alarm module.
Limit: Sets minimum/maximum set points allowed for each loop.
Event: Allows the user to edit names used to describe events.
Navigation: Allows the user to choose text based or icon based/slide page
navigation menus.
Recovery: Allows user to set program recovery action on power failure.
Comms menu
Comms: Allows user to set MCT communication settings.
Barcode: Provides access to the barcode reader settings.
Email menu
Email: Provides access to the MCT email system manager.
Message: Allows the user to send an email message to users
entered in the system.
Offline menu
Offline: Provides access to offline system settings.